| PPM Check Points-FATU (Mechanical) |
| Apply Lock In & Tag Out notice |
| Use personal protective device |
| Performance Check list |
| Check / Adjust belt tension so that belt is tight |
| Check the condition of V belt for any crack. Replace, if required |
| Check the tightness of the pulley and alignment |
| Check for any abnormal noise or vibration and tighten fastener if required |
| Check the drain tray closing |
| Check the Water supply and Pump |
| Check flaot valve & Paper fins . |
| Check the lubrication of Motar . |
| Check the tightness of the pulley and alignment |
| Check the control DB and check the connection |
| Temp of inlet chiller water |
| Temp of outlet chiller water |
| Pressure of inlet & outlet . |
Sunday 24 June 2012
PPM Checklist-FATU
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment